 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HMC-VVD104 v00.0907 GaAs PIN MMIC VOLTAGE-VARIABLE ATTENUATOR, 70 - 86 GHz Features Low Insertion Loss: 2 dB Wide Dynamic Range: 14 dB Balanced Topology Flexible Biasing Single Control Voltage: -5V to +5V Die Size: 1.99 x 1.845 x 0.1 mm Typical Applications This HMC-VVD104 is ideal for: * E-Band Communication Systems * Short Haul / High Capacity Radios ATTENUATORS - ANALOG - CHIP * Automotive Radar * Test Equipment * SATCOM and Sensors Functional Diagram General Description The HMC-VVD104 is a monolithic GaAs PIN diode based Voltage Variable Attenuator (VVA) which exhibits low insertion loss, high IP3, and wide dynamic range. The balanced topology delivers excellent return loss while the single control voltage can be applied to either side of the die. All bond pads and the die backside are Ti/Au metallized, and the PIN diode devices are fully passivated for reliable operation. This wideband VVA MMIC is compatible with conventional die attach methods, as well as thermocompression and thermosonic wirebonding, making it ideal for MCM and hybrid microcircuit applications. All data shown herein is measured with the chip in a 50 Ohm environment and contacted with RF probes. Electrical Specifi cations, TA = +25 C, 50 Ohm System Parameter Frequency Range Insertion Loss Attenuation Range Input Return Loss Output Return Loss *Unless otherwise indicated, all measurements are from probed die Min. Typ. 70 - 86 2 14 14 12 3 Max. Units GHz dB dB dB dB 0-6 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC-VVD104 v00.0907 GaAs PIN MMIC VOLTAGE-VARIABLE ATTENUATOR, 70 - 86 GHz Attenuation vs. Frequency Dynamic Range vs. Frequency Input Return Loss vs. Frequency Output Return Loss vs. Frequency Note: Measured Performance Characteristics (Typical Performance at 25C) Pin= -20 dBm For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 0-7 ATTENUATORS - ANALOG - CHIP HMC-VVD104 v00.0907 GaAs PIN MMIC VOLTAGE-VARIABLE ATTENUATOR, 70 - 86 GHz Absolute Maximum Ratings Control Voltage Range (Vdd) Storage Temperature Operating Temperature Bias Current (Idd) -6V to +6V Vdc -65 to +150 C -55 to +85 C 30 mA ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS ATTENUATORS - ANALOG - CHIP Outline Drawing NOTES: 1. ALL DIMENSIONS ARE IN INCHES [MM]. 2. TYPICAL BOND PAD IS .004" SQUARE. 3. BACKSIDE METALLIZATION: GOLD. 4. BACKSIDE METAL IS GROUND. 5. BOND PAD METALLIZATION: GOLD. 6. CONNECTION NOT REQUIRED FOR UNLABELED BOND PADS. 7. OVERALL DIE SIZE .002" 0-8 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com |
Price & Availability of HMC-VVD104
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |